Maintenance
How to Clean and Maintain a Steel Water Storage Tank

How often to clean a steel water tank, the safe step-by-step process, what to check on sectional and round tanks, and when to call a specialist.
A steel water storage tank should be inspected regularly and cleaned at least once a year, or more often if the water carries a lot of sediment. Cleaning means isolating and draining the tank, removing sludge, inspecting the structure, washing the interior gently, disinfecting where the water is for human use, and refilling under control.
Regular maintenance protects water quality, keeps fittings working and extends the life of the tank. Summer is a good time to plan it: warm water encourages algae and bacteria, and the December shutdown gives many commercial and industrial sites a natural window to take a tank out of service.
This guide covers how often to clean, the safe step-by-step process, what to check on sectional and round steel tanks, and when to call in a specialist.
Key takeaways
- Clean steel water tanks at least once a year, and inspect them more often.
- Entering a tank is confined space work. Only trained, equipped people should do it.
- Use low-pressure water and soft brushes. Aggressive cleaning damages liners, sealant and coatings.
- Disinfection of tanks holding water for human use should follow SANS 10252-1 and your water treatment specialist's guidance.
- A split, two-compartment tank lets you clean one side while the other stays in service.
Why tank maintenance matters
Over time, every water tank collects sediment, silt and organic matter. In hot weather, standing water and sludge create good conditions for algae and bacteria. Fittings such as ball valves, level indicators and overflows can stick or block. On steel tanks, small issues such as a weeping joint or a scratch in a coating are easy to fix when found early and expensive when left.
A planned maintenance routine protects:
- Water quality: less sediment, fewer odours and lower contamination risk.
- Reliability: inlet, outlet and overflow fittings that work when needed.
- Fire reserves: a full, unobstructed supply for sprinkler pumps.
- The asset: coatings, sealant, bolts and liners that last their full design life.
How often should you clean a water tank?
As a general guide:
| Task | Suggested frequency |
|---|---|
| Visual check of the outside, fittings and level | Monthly |
| Check roof hatches, vents and screens are closed and intact | Monthly |
| Internal inspection and sediment check | Every six to twelve months |
| Full clean and sludge removal | At least once a year, more often for dirty or sediment-heavy water |
| Water quality testing for potable or process water | As set by your water treatment specialist |
Sites with borehole water, harvested rainwater or high-sediment process water usually need more frequent cleaning. Guidance such as the City of Cape Town's alternative water guidelines recommends removing silt and sludge from storage tanks once a year or more often, depending on how much water passes through the system.
Step-by-step: cleaning a steel water storage tank
1. Plan the shutdown
Agree the date with everyone who relies on the water. If the tank is a fire reserve, inform your fire system service provider and insurer before taking it out of service, and arrange temporary cover if required. If the tank has two compartments, plan to clean one at a time.
2. Isolate the tank
Close the inlet valve and isolate any pumps that draw from the tank. Lock and tag the valves so nobody refills the tank while people are working inside.
3. Drain the tank
Drain the water through the drain or scour outlet. Where possible, use the water elsewhere on site, for example for irrigation or dust control, rather than wasting it. Discharge must go to the correct place in line with your municipality's rules.
4. Make the space safe to enter
A water tank is a confined space. Before anyone enters, ventilate the tank, test the air, and follow your site's confined space permit procedure, with a trained standby person outside and a rescue plan in place. If your site does not have this capability, use a specialist contractor.
5. Remove sludge and sediment
Scoop or vacuum out sludge from the floor using as little water as possible. Dispose of it as solid waste according to local rules.
6. Inspect the interior
With the tank empty, inspect it thoroughly before washing. What to look for depends on the tank type (see below). Photograph anything unusual so it can be assessed.
7. Wash gently
Wash the walls and floor with low-pressure water and soft brushes. Avoid high-pressure jets, wire brushes and harsh chemicals, which can damage PVC liners, joint sealant and galvanised or Aluzinc coatings.
8. Disinfect if the water is for human use
For potable water tanks, disinfect the interior and fittings according to SANS 10252-1 and the dosing set by your water treatment specialist. Allow the required contact time, then flush thoroughly.
9. Refill and return to service
Refill slowly while checking for leaks at joints, fittings and outlets. Confirm the ball valve or level control shuts off correctly and the overflow is clear. For potable water, test the water before returning the tank to service.
10. Record the work
Keep a simple maintenance log with the date, findings, photos and any repairs. This helps you spot trends and plan future work.
What to check on a sectional steel tank
Sectional steel tanks are built from bolted, hot-dip galvanised panels, so inspection focuses on the joints and structure:
- Panel joints and sealant: look for weeping, staining or sealant that has hardened or pulled away.
- Bolts: check for loose, missing or corroded bolts, inside and out.
- Internal bracing: check stays and tie rods are secure and free from damage.
- Galvanised surfaces: note any scratches, chips or areas of corrosion.
- Partition walls: on split tanks, check the divisional wall and its seals.
What to check on a round steel tank
Cylindrical steel tanks from Videx have an Aluzinc AZ150 coated shell and a food-grade PVC liner that holds the water, so inspection focuses on the liner and shell:
- Liner: look for punctures, tears, folds or creases, and check the liner is properly supported at the top edge.
- Shell: check the outside of the Aluzinc shell for damage, corrosion at cut edges and loose fixings.
- Roof: check the roof structure, sheeting and access hatch.
A round tank's liner can be replaced without replacing the steel shell, which is an economical way to extend the tank's life.
Fittings and external checks for all tanks
- Inlet ball valve or level control opens and closes properly
- Overflow is clear and screened against insects and animals
- Level indicator reads correctly
- Outlet and drain valves operate freely and seal fully
- Vents and hatches are closed, screened and lockable
- Ladders, platforms and handrails are secure
- Foundation shows no cracking, settlement or erosion around the base
On fire water tanks, also check the vortex inhibitor and pump suction outlet, and confirm the tank refills to its design level. See our fire protection tanks page for more on fire reserve design.
When to call in a specialist
Call in a specialist when:
- Your team cannot do confined space entry safely
- You find leaks at joints, damaged liners or structural damage
- The tank is a fire reserve that must be back in service within a fixed time
- The water quality is poor even after cleaning
- You want a formal condition report before planning upgrades
Videx's water reservoir services include inspections, cleaning, leak detection, component replacement, and rehabilitation such as relining or capacity expansion.
Frequently asked questions
How often should a commercial water tank be cleaned?
At least once a year for most sites, with regular inspections in between. Tanks holding borehole water, harvested rainwater or sediment-heavy process water usually need more frequent cleaning.
Can I clean a water tank without draining it?
Some sediment can be removed by specialist underwater cleaning, but a proper inspection and clean usually needs the tank drained. A two-compartment sectional tank avoids losing supply, because one side stays in service while the other is cleaned.
Can I use a pressure washer inside a steel tank?
Avoid high pressure. It can damage PVC liners, joint sealant and protective coatings. Use low-pressure water and soft brushes instead.
What chemicals should be used to disinfect a water tank?
For tanks holding water for human use, disinfection should follow SANS 10252-1 and the product and dosing recommended by your water treatment specialist. Flush the tank thoroughly afterwards and test the water before use.
This article provides general guidance only. Tank maintenance procedures should follow the manufacturer's instructions, applicable standards and your site's health and safety requirements.
About this article
Written by the engineering team at Videx Storage Tanks, a South African manufacturer of sectional and cylindrical steel water storage tanks based in Wadeville, Gauteng, with a branch in Bellville, Cape Town. Videx has more than 40 years of experience and more than 500 completed projects, and is ISO 9001:2015 certified.
Need your tank inspected, cleaned or repaired? Speak to a Videx engineer about maintenance and repair.
