Water Security
Rainwater Harvesting for Commercial and Industrial Sites in South Africa

How much rain a commercial roof can collect, what a rainwater harvesting system includes, what the rules allow and how to choose the right storage tank.
Rainwater harvesting means collecting the rain that falls on your roofs and storing it in a tank for later use. For a commercial or industrial site with a large roof, it can supply a meaningful share of non-drinking water, such as toilet flushing, irrigation and wash-down water, and it reduces how much you draw from the municipal supply.
Across Gauteng and most of the summer rainfall region, the season runs from roughly November to March, and much of the rain falls in short, heavy thunderstorms. That pattern makes storage capacity the deciding factor: a big roof can produce tens of thousands of litres in one afternoon, and without a tank large enough to hold it, most of that water runs straight into the stormwater system.
This guide explains how much water a site can realistically collect, what a commercial system includes, what the rules allow, and how to choose the right storage tank.
Key takeaways
- Every 1 mm of rain on 1 m² of roof is 1 litre of water before losses. Large commercial roofs produce large volumes quickly.
- Summer rain on the Highveld arrives in short, intense storms, so tank capacity matters more than gutter size alone.
- Harvested rainwater is best suited to non-drinking uses such as toilet flushing, irrigation, vehicle washing and wash bays.
- Municipal by-laws control how rainwater is connected to a building. Back-flow prevention and correct overflow routing are standard requirements.
- Steel storage tanks suit commercial volumes because one engineered tank can replace many small plastic units.
How much rainwater can your roof collect?
The basic calculation is simple:
Roof area (m²) × rainfall (mm) × runoff factor = litres collected
The runoff factor allows for losses from evaporation, splash and first-flush diversion. Metal roofs shed water most efficiently. The City of Cape Town's guidelines for alternative water installations note that about 11 mm of rain on 100 m² of metal roof produces 1,000 litres, while a tiled roof needs about 16 mm for the same volume.
Worked example
A warehouse with a 5,000 m² metal roof receives a 20 mm thunderstorm:
- 5,000 m² × 20 mm = 100,000 litres before losses
- At a runoff factor of about 0.9, that is roughly 90,000 litres, or 90 kL
A single afternoon storm can therefore fill a 90 kL tank. If the site only has a few small tanks, most of that water is lost. This is why commercial rainwater systems are sized around the storage, not just the roof.
What can harvested rainwater be used for?
Rainwater is generally a lower-risk alternative water source than greywater or groundwater, but its quality varies. Roof material, bird droppings, leaves and air pollution all affect it. For most commercial sites, the practical uses are:
| Use | Typical treatment needed |
|---|---|
| Landscape irrigation | Screening and basic filtration |
| Toilet and urinal flushing | Filtration, often with disinfection |
| Vehicle washing and wash bays | Filtration |
| Hard-surface and yard cleaning | Filtration |
| Cooling and process water | Testing and treatment matched to the process |
| Drinking, cooking and washing | Not permitted in most municipalities without special approval and full treatment |
Before using rainwater inside a building, have it tested at an accredited laboratory and agree the treatment with a water treatment specialist. The intended use decides the quality standard.
What a commercial rainwater harvesting system includes
A reliable system has more parts than a tank and a downpipe. A typical layout includes:
- Catchment: the roof, gutters and downpipes, kept clean and free of debris.
- Leaf screens and first-flush diverters: these stop leaves and the dirtiest first runoff of each storm from entering the tank.
- Storage tank: sized to the roof yield and the site's demand, on a properly designed foundation.
- Overflow: untreated rainwater overflow is normally routed to the stormwater system. If the stored water is treated with chemicals such as chlorine, the overflow usually has to go to sewer instead.
- Pump and controls: to deliver water at the pressure each use needs, with level control.
- Filtration and treatment: matched to the end use.
- Back-flow prevention: to keep harvested water separate from the municipal drinking water supply.
- Labelling and signage: non-drinking water pipes and taps clearly marked.
Keeping rainwater separate from municipal water
Most municipalities require harvested water to be kept fully separate from the drinking water network. In Cape Town, for example, a reduced pressure zone (RPZ) back-flow preventer is required where alternative water is plumbed into a building, and a break tank with a proper air gap is the accepted alternative on larger installations. Check your own municipality's water by-law before connecting anything to a building's plumbing.
Choosing the right storage tank for a commercial site
Once you know your roof yield and demand, the tank choice comes down to volume, footprint and lifespan.
Volume
Commercial roofs generate volumes measured in tens or hundreds of kilolitres. Storing that in small plastic tanks means many units, many connections and a large footprint. A single engineered steel tank can hold the same volume in one structure with one inlet, one outlet and one overflow.
Videx sectional steel tanks are built from bolted, hot-dip galvanised panels and range from about 2 kL to more than 10 ML. Cylindrical steel tanks use an Aluzinc AZ150 coated shell with a food-grade PVC liner and suit large volumes where there is open space.
Footprint and layout
Sectional tanks can be configured as squares or long rectangles, which helps on tight industrial sites. Round tanks are structurally efficient where there is open ground. Sectional tanks can also be split into compartments, which lets one side stay in service while the other is cleaned.
Foundations and approvals
Large tanks need an engineered foundation. Some municipalities also require building plan approval for larger tanks. Cape Town's guidelines, for instance, list tanks of more than 10,000 litres and tanks on structures more than 1 m above ground among those that need approval. Allow time for this in your programme.
Planning tips for a successful system
- Size the tank to your demand as well as your roof. A tank that fills in one storm and is used slowly can be smaller than a tank that must carry the site through dry spells between storms.
- Combine rainwater with backup storage. The same tank can store rainwater in summer and be topped up from the municipal supply through an air gap when needed. Read our guide to backup water storage for businesses for more on outage planning.
- Plan maintenance from day one. Screens, first-flush diverters and the tank itself need regular cleaning. Sediment and sludge should be removed at least once a year.
- Keep fire water separate. If a site also needs a sprinkler reserve, design it as a dedicated compartment or tank so harvested water use never reduces the fire reserve.
Real examples of bulk steel storage
Videx has supplied bulk steel water storage for commercial developments across Gauteng, including:
- Kikuyu Lifestyle Centre: a 630 kL powder-coated cylindrical steel reservoir in Waterfall City, finished to blend into a premium estate setting.
- Fourways Mall: twin cylindrical Aluzinc tanks providing 1,846.64 kL of bulk water storage in Sandton.
- Fleurhof Mall: a powder-coated sectional steel tank with an internal divisional wall plus two cylindrical tanks in Soweto.
These projects show the scale of storage that commercial sites already use. The same tank types can be specified to hold harvested rainwater. Read more about commercial and industrial water storage.
Frequently asked questions
Do I need permission to harvest rainwater at a business?
Collecting rainwater from a roof does not usually need a national water use licence. Connecting a rainwater system to a building's plumbing normally needs approval from your municipality, and larger tanks may need building plan approval. Check with your local municipality before installation.
Can harvested rainwater be used for drinking?
In most municipalities, harvested rainwater may not be used for drinking, cooking or body washing unless special approval is in place and the water is treated and monitored to drinking water standards. For most commercial sites, non-drinking uses give the best return.
How big should a commercial rainwater tank be?
Start with roof area multiplied by typical storm rainfall, then compare it with the site's daily non-drinking demand. The right size balances how much one storm delivers against how quickly the site uses it. Our guide to sizing a water storage tank walks through the demand side step by step.
Is a steel or plastic tank better for rainwater?
For small volumes, plastic tanks are common. For commercial volumes, steel tanks hold far more water in a single structure, can be split into compartments and are built for a long service life. The right choice depends on volume, space and budget.
This article provides general guidance only. Rules on alternative water differ between municipalities, and system design should be confirmed by a qualified engineer and plumber.
About this article
Written by the engineering team at Videx Storage Tanks, a South African manufacturer of sectional and cylindrical steel water storage tanks based in Wadeville, Gauteng, with a branch in Bellville, Cape Town. Videx has more than 40 years of experience and more than 500 completed projects, and is ISO 9001:2015 certified.
Planning rainwater storage for a commercial or industrial site? Speak to a Videx engineer about capacity, layout and specification.
